Home / Downloads / Technologies
End Protection Cut Groove Dimensions for XH-1000 Or XH-70EP Couplings

“EP” End Protection Cut Groove Dimensions for XH-1000 or XH-70EP Couplings

  1. EP cut-grooves are connected with Shurjoint XH-1000 or XH-70EP couplings only.  Do not roll groove pipe, which can damage the coating or lining and or create flared pipe ends.
  2. Always use plain-end square cut pipe.  Do not use beveled end pipe.
  3. Always use an EP gasket with a XH-1000 or XH-70EP coupling.  Do not use a standard gasket.
  4. The gasket seating area shall be free from deep scores, marks, or ridges that could prevent a positive seal.
Download PDF